File:WelderFeed-before.jpg: Difference between revisions

Latest revision as of 14:17, 9 July 2021

Welder spool setup as purchased

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	14:17, 9 July 2021		999 × 1,400 (553 KB)	CaptainProton (talk \| contribs)	Welder spool setup as purchased

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Image title	-START
Camera manufacturer	SAMSUNG
Camera model	SGH-M919
Exposure time	1/17 sec (0.058823529411765)
F Number	f/2.2
ISO speed rating	250
Date and time of data generation	18:27, 11 May 2021
Lens focal length	4.2 mm
User comments	-START
JPEG file comment	-START
Orientation	Normal
Horizontal resolution	150 dpi
Vertical resolution	150 dpi
Software used	GIMP 2.10.8
File change date and time	07:11, 9 July 2021
Y and C positioning	Centered
Exposure Program	Normal program
Exif version	2.2
Date and time of digitizing	18:27, 11 May 2021
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	4.0590209960938
APEX aperture	2.28
APEX brightness	0.03125
APEX exposure bias	0
Maximum land aperture	2.28 APEX (f/2.2)
Metering mode	Center weighted average
Light source	Unknown
Flash	Flash did not fire
Supported Flashpix version	1
Color space	sRGB
Sensing method	One-chip color area sensor
Scene type	A directly photographed image
Exposure mode	Auto exposure
White balance	Auto white balance
Focal length in 35 mm film	31 mm
Scene capture type	Standard
Unique image ID	S13F0SAGG01
Reference for direction of image	Magnetic direction
Direction of image	160
Unique ID of original document	xmp.did:45d22d60-d94c-47fc-afb5-fb1079a42955