h.h - User contributions [en]

Laser cutting

2023-11-05T22:13:45Z

Eric:

[https://docs.google.com/document/d/1-azwhvyiFgJGq22cQhkOAhjnwkc_tDvtG9TsF-JcI9o Full Spectrum Laser and Inkscape]

[https://docs.google.com/document/d/1f6M7tqdPphkyxaVtgfzmpV8GEHUrU9uKsMMyZOWtp_o/edit?usp=sharing General Lasering Guide]

[https://docs.google.com/spreadsheets/d/1tYXn2XOXLdgSak4xfrpdkQVexwcsgZbQc4YEtIYjCyo FSL Material Settings]

[https://drive.google.com/file/d/1BpGDzn2zSZsa3uOftHfMF9Z4tIfVkZ7w/view?usp=drive_link Retina Software] from [https://fsl3d.zendesk.com/hc/en-us/articles/4411460915611-RetinaEngrave-3D-Downloads-Manual FSL]

Lock Up Procedures

2023-08-12T17:38:20Z

Eric:

How to lock up the space when you are the last one to leave.

== [https://www.youtube.com/watch?v=QaS9xGYyBl4 Try the video] ==

== Points of Entry ==
Make sure you check that each of these entry points are locked appropriately, each door has it's own procedure

* Hedron Hackerspace Door (aka Main Door)
* Glass Blowers Door (aka Glass Blowers Door)
* Outside Gate
* Welders Door

=== Hedron Hackerspace Door (aka Main Door) ===
You must '''both''' push the lock button in the inside handle ''and'' turn the lock button 90 degrees. Double check that the door is fully locked after closing the door behind you

== Lights ==
There are various light switches in the space, try to find them all, think of it like a game

== Other Considerations ==
* Big Exhaust Fan
* Laser Exhaust
* Laser Diode

=== Big Exhaust Fan Procedures ===

=== Laser Exhaust ===
see Laser Cutter Procedures

=== Laser Diode ===
see Laser Cutter Procedures

Facilitators

2023-08-12T17:35:26Z

Eric:

Facilitators are members who help out others at the space. They have been granted extra privileges (aka responsibilities) by being present and showing an aptitude for maintaining the space. You can see who is a facilitator by looking at their role in discord.

== What to expect ==
* Keep the doors open for new members to come by
* Deal with visitors and give them a tour of our space if necessary
* Signing up members by pointing them to the bottom of our website, and having them sign the [[Member Agreement]] and [[liability waiver]]. Those go into the drop box by the lightswitch in the [[Back office]]
* Train folks how to use equipment, and make sure people are doing things safely
* Recite the [[FAQs]] word for word, while standing on [[The Bible]](not true)
* Maybe think about [[Hosting Events]].

Equipment

2023-03-13T09:03:30Z

Eric:

Here is a list of all the shared equipment we have. Some things have their own pages describing how to use them and their rates.

{| class="wikitable"
|-
! scope="col"| Key
! scope="col"| Meaning
|-
! scope="row"| F
| Free to use
|-
! scope="row"| C
| Bring your own consumables or pay for ours. A tiny bit of free use is okay
|-
! scope="row"| R
| Rental price required. (Covers maintenance)
|-
! scope="row"| T
| Training or certification required
|-
! scope="row"| t
| Please ask for help if you haven't used this tool before
|-
|}

{| class="wikitable"
|-
! scope="col"| Equipment
! scope="col"| Rates
! scope="col"| See also
|-
! scope="row" colspan="3"| [[3D Printing | 3D Printers]]
|-
| scope="row"| Two Ender 3 Pros
| C
| We stock basic PLAs for $20/kg
|-
| scope="row"| Kossel Mini
| C
| We stock basic PLAs for $20/kg
|-
| scope="row"| Anycubic Photon Mono X resin printer
| C
| We stock basic resin for $35/kg
|-
| scope="row"| Smaller resin printer
| C
| We stock basic resin for $35/kg
|-
! scope="row" colspan="3"| Other CNC
|-
| scope="row"| 40w Flux Beambox laser cutter/engraver 15in x 14in
| R T
| $5/hr of laser time. [[Laser cutting]]
|-
| scope="row"| 4ft X 4ft x 2.75in [[CNC Router]]
| R T
| $15-25/hr of spindle time
|-
| scope="row"| Fabtotum CNC router (3D print head damaged)
| F
|
|-
| scope="row"| MH-871-MK2 [[Vinyl Cutter]]
| F
|
|-
! scope="row" colspan="3"| Metalworking
|-
| scope="row"| Millermatic auto wire-feed MIG 110v welder with argon/CO2
| R T
| $5/hr of torch time. Most people wont use more than 1hr in a day
|-
| scope="row"| 220v MIG Welder with argon/CO2 (Harbor Freight)
| R T
| $5/hr of torch time. Most people wont use more than 1hr in a day
|-
| scope="row"| Vertical [[Milling Machine]] (Grizzly G1005)
| C t
| Training and checkoff required. Bring your own bits or pay for any that you use.
|-
| scope="row"| Big old school lathe
| C t
|
|-
| scope="row"| Drill press
| C t
|
|-
| scope="row"| Horizontal/Vertical band saw for metal
| F t
|
|-
| scope="row"| Bench grinders
| F t
|
|-
| scope="row"| Angle grinders(Cutoff, flapdisc, grinding wheel)
| C T
| Safety check required! This is a [[dangerous tool]]
|-
| scope="row"| Various drills
| C
|
|-
| scope="row"| Other metalworking equipment
| N/A
| We share the building with some metalworkers with lots of equipment. See Eric for case-by-case use. Experience preferred.
|-
! scope="row" colspan="3"| Other shop/woodworking
|-
| scope="row"| Compound Miter Chop Saw
| F
|
|-
| scope="row"| Craftsman table saw
| F
|
|-
| scope="row"| Benchtop belt sander
| F
|
|-
| scope="row"| Sanders
| F
|
|-
| scope="row"| Various air tools + 120psi continuous shop air
| F
|
|-
| scope="row"| T-shirt heat press
| F t
|
|-
| scope="row"| Sewing Machine
| F
|
|-
! scope="row" colspan="3"| Tech
|-
| scope="row"| Adjustable soldering irons
| F
|
|-
| scope="row"| Hot air rework station
| F t
|
|-
| scope="row"| Digital oscilloscope and signal generator
| F t
|
|-
| scope="row"| Handheld digital oscilloscope
| F
|
|-
| scope="row"| Desoldering gun
| F
|
|-
| scope="row"| Multimeters
| F
|
|-
| scope="row"| Shared computer - powerful desktop
| F
|
|-
| scope="row"| Shared computer - less powerful laptop
| F
|
|-
| scope="row"| Wide range of prototyping components available for use/purchase
| C
|
|-
| scope="row"| Basic ink-jet color printer HP Officejet with scanning and double sided printing
| C
|
|-
! scope="row" colspan="3"| Plastic recycling
|-
| scope="row"| Precious Plastics [[Extruder Shredder Combo]] for use with free provided PP
| F T
|
|-
| scope="row"| [[Shredder]] for general use
| F T
|
|-
| scope="row"| Toaster oven for experiments
| F
|
|-
| scope="row"| Clothes irons
| F
|
|-
| scope="row"| Coming soon: Sheet press oven
| F
|
|-
|}

Equipment

2023-03-13T09:02:55Z

Eric:

Here is a list of all the shared equipment we have. Some things have their own pages describing how to use them and their rates.

{| class="wikitable"
|-
! scope="col"| Key
! scope="col"| Meaning
|-
! scope="row"| F
| Free to use
|-
! scope="row"| C
| Bring your own consumables or pay for ours. A tiny bit of free use is okay
|-
! scope="row"| R
| Rental price required. (Covers maintenance)
|-
! scope="row"| T
| Training or certification required
|-
! scope="row"| t
| Please ask for help if you haven't used this tool before
|-
|}

{| class="wikitable"
|-
! scope="col"| Equipment
! scope="col"| Rates
! scope="col"| See also
|-
! scope="row" colspan="3"| [[3D Printing | 3D Printers]]
|-
| scope="row"| Two Ender 3 Pros
| C
| We stock basic PLAs for $20/kg
|-
| scope="row"| Kossel Mini
| C
| We stock basic PLAs for $20/kg
|-
| scope="row"| Anycubic Photon Mono X resin printer
| C
| We stock basic resin for $35/kg
|-
| scope="row"| Smaller resin printer
| C
| We stock basic resin for $35/kg
|-
! scope="row" colspan="3"| Other CNC
|-
| scope="row"| 40w Muse Core laser cutter/engraver 20in x 12in
| R T
| Rate TBD [[Laser cutting]]
|-
| scope="row"| 40w Flux Beambox laser cutter/engraver 15in x 14in
| R T
| $5/hr of laser time. [[Laser cutting]]
|-
| scope="row"| 4ft X 4ft x 2.75in [[CNC Router]]
| R T
| $15-25/hr of spindle time
|-
| scope="row"| Fabtotum CNC router (3D print head damaged)
| F
|
|-
| scope="row"| MH-871-MK2 [[Vinyl Cutter]]
| F
|
|-
! scope="row" colspan="3"| Metalworking
|-
| scope="row"| Millermatic auto wire-feed MIG 110v welder with argon/CO2
| R T
| $5/hr of torch time. Most people wont use more than 1hr in a day
|-
| scope="row"| 220v MIG Welder with argon/CO2 (Harbor Freight)
| R T
| $5/hr of torch time. Most people wont use more than 1hr in a day
|-
| scope="row"| Vertical [[Milling Machine]] (Grizzly G1005)
| C t
| Training and checkoff required. Bring your own bits or pay for any that you use.
|-
| scope="row"| Big old school lathe
| C t
|
|-
| scope="row"| Drill press
| C t
|
|-
| scope="row"| Horizontal/Vertical band saw for metal
| F t
|
|-
| scope="row"| Bench grinders
| F t
|
|-
| scope="row"| Angle grinders(Cutoff, flapdisc, grinding wheel)
| C T
| Safety check required! This is a [[dangerous tool]]
|-
| scope="row"| Various drills
| C
|
|-
| scope="row"| Other metalworking equipment
| N/A
| We share the building with some metalworkers with lots of equipment. See Eric for case-by-case use. Experience preferred.
|-
! scope="row" colspan="3"| Other shop/woodworking
|-
| scope="row"| Compound Miter Chop Saw
| F
|
|-
| scope="row"| Craftsman table saw
| F
|
|-
| scope="row"| Benchtop belt sander
| F
|
|-
| scope="row"| Sanders
| F
|
|-
| scope="row"| Various air tools + 120psi continuous shop air
| F
|
|-
| scope="row"| T-shirt heat press
| F t
|
|-
| scope="row"| Sewing Machine
| F
|
|-
! scope="row" colspan="3"| Tech
|-
| scope="row"| Adjustable soldering irons
| F
|
|-
| scope="row"| Hot air rework station
| F t
|
|-
| scope="row"| Digital oscilloscope and signal generator
| F t
|
|-
| scope="row"| Handheld digital oscilloscope
| F
|
|-
| scope="row"| Desoldering gun
| F
|
|-
| scope="row"| Multimeters
| F
|
|-
| scope="row"| Shared computer - powerful desktop
| F
|
|-
| scope="row"| Shared computer - less powerful laptop
| F
|
|-
| scope="row"| Wide range of prototyping components available for use/purchase
| C
|
|-
| scope="row"| Basic ink-jet color printer HP Officejet with scanning and double sided printing
| C
|
|-
! scope="row" colspan="3"| Plastic recycling
|-
| scope="row"| Precious Plastics [[Extruder Shredder Combo]] for use with free provided PP
| F T
|
|-
| scope="row"| [[Shredder]] for general use
| F T
|
|-
| scope="row"| Toaster oven for experiments
| F
|
|-
| scope="row"| Clothes irons
| F
|
|-
| scope="row"| Coming soon: Sheet press oven
| F
|
|-
|}

Equipment

2023-03-13T09:02:19Z

Eric:

Here is a list of all the shared equipment we have. Some things have their own pages describing how to use them and their rates.

{| class="wikitable"
|-
! scope="col"| Key
! scope="col"| Meaning
|-
! scope="row"| F
| Free to use
|-
! scope="row"| C
| Bring your own consumables or pay for ours. A tiny bit of free use is okay
|-
! scope="row"| R
| Rental price required. (Covers maintenance)
|-
! scope="row"| T
| Training or certification required
|-
! scope="row"| t
| Please ask for help if you haven't used this tool before
|-
|}

{| class="wikitable"
|-
! scope="col"| Equipment
! scope="col"| Rates
! scope="col"| See also
|-
! scope="row" colspan="3"| [[3D Printing | 3D Printers]]
|-
| scope="row"| Two Ender 3 Pros
| C
| We stock basic PLAs for $20/kg
|-
| scope="row"| Kossel Mini
| C
| We stock basic PLAs for $20/kg
|-
| scope="row"| Anycubic Photon Mono X resin printer
| C
| We stock basic resin for $35/kg
|-
| scope="row"| Smaller resin printer
| C
| We stock basic resin for $35/kg
|-
| scope="row"| Reprap Pro Mendel with paste extruder (OOC, needs work)
| C
| We stock basic PLAs for $20/kg
|-
! scope="row" colspan="3"| Other CNC
|-
| scope="row"| 40w Muse Core laser cutter/engraver 20in x 12in
| R T
| Rate TBD [[Laser cutting]]
|-
| scope="row"| 40w Flux Beambox laser cutter/engraver 15in x 14in
| R T
| $5/hr of laser time. [[Laser cutting]]
|-
| scope="row"| 4ft X 4ft x 2.75in [[CNC Router]]
| R T
| $15-25/hr of spindle time
|-
| scope="row"| Fabtotum CNC router (3D print head damaged)
| F
|
|-
| scope="row"| MH-871-MK2 [[Vinyl Cutter]]
| F
|
|-
! scope="row" colspan="3"| Metalworking
|-
| scope="row"| Millermatic auto wire-feed MIG 110v welder with argon/CO2
| R T
| $5/hr of torch time. Most people wont use more than 1hr in a day
|-
| scope="row"| 220v MIG Welder with argon/CO2 (Harbor Freight)
| R T
| $5/hr of torch time. Most people wont use more than 1hr in a day
|-
| scope="row"| Vertical [[Milling Machine]] (Grizzly G1005)
| C t
| Training and checkoff required. Bring your own bits or pay for any that you use.
|-
| scope="row"| Big old school lathe
| C t
|
|-
| scope="row"| Drill press
| C t
|
|-
| scope="row"| Horizontal/Vertical band saw for metal
| F t
|
|-
| scope="row"| Bench grinders
| F t
|
|-
| scope="row"| Angle grinders(Cutoff, flapdisc, grinding wheel)
| C T
| Safety check required! This is a [[dangerous tool]]
|-
| scope="row"| Various drills
| C
|
|-
| scope="row"| Other metalworking equipment
| N/A
| We share the building with some metalworkers with lots of equipment. See Eric for case-by-case use. Experience preferred.
|-
! scope="row" colspan="3"| Other shop/woodworking
|-
| scope="row"| Compound Miter Chop Saw
| F
|
|-
| scope="row"| Craftsman table saw
| F
|
|-
| scope="row"| Benchtop belt sander
| F
|
|-
| scope="row"| Sanders
| F
|
|-
| scope="row"| Various air tools + 120psi continuous shop air
| F
|
|-
| scope="row"| T-shirt heat press
| F t
|
|-
| scope="row"| Sewing Machine
| F
|
|-
! scope="row" colspan="3"| Tech
|-
| scope="row"| Adjustable soldering irons
| F
|
|-
| scope="row"| Hot air rework station
| F t
|
|-
| scope="row"| Digital oscilloscope and signal generator
| F t
|
|-
| scope="row"| Handheld digital oscilloscope
| F
|
|-
| scope="row"| Desoldering gun
| F
|
|-
| scope="row"| Multimeters
| F
|
|-
| scope="row"| Shared computer - powerful desktop
| F
|
|-
| scope="row"| Shared computer - less powerful laptop
| F
|
|-
| scope="row"| Wide range of prototyping components available for use/purchase
| C
|
|-
| scope="row"| Basic ink-jet color printer HP Officejet with scanning and double sided printing
| C
|
|-
! scope="row" colspan="3"| Plastic recycling
|-
| scope="row"| Precious Plastics [[Extruder Shredder Combo]] for use with free provided PP
| F T
|
|-
| scope="row"| [[Shredder]] for general use
| F T
|
|-
| scope="row"| Toaster oven for experiments
| F
|
|-
| scope="row"| Clothes irons
| F
|
|-
| scope="row"| Coming soon: Sheet press oven
| F
|
|-
|}

Transparency

2023-03-13T08:56:15Z

Eric: Created page with "https://hhacker.space/numbers.html Here is a link to this year's current income/expenses/member counts"

[[https://hhacker.space/numbers.html Here is a link to this year's current income/expenses/member counts]]

Main Page

2023-03-13T08:54:29Z

Eric:

__NOTOC__
Welcome to our wiki! Members are invited to register and edit pages. Knowledge is Power!

[[File:Hh_pliers_logo.jpg|600px|thumbnail]]

== About Us ==

Hedron Hackerspace is a community shop space where members can access tools and get instruction for building your dream project. We value [[https://discord.gg/X84tscW communication]], sharing, [[Transparency]] and a bunch of other wholesome things.
==== [[2020 SE Bush St|Our Physical Location]] ====

== [[Contact|Contact Us]] ==

See [[Contact|how to contact us]]

== [[Membership Info|Membership]] ==

[[Membership Info|Interested in becoming a member?]]

== [[Equipment|Tools and Equipment]] ==

See a [[Equipment|list of our Tools and Equipment]]

== [[FAQs]] ==
Checkout our common list of [[FAQs]]

Info for [[Facilitators]]

Discord

2023-01-05T00:06:01Z

Eric:

We have an active Discord, we also have a [[Matrix Bridge]]

[https://discord.gg/9UQVNdE4Dp Link to join our Discord]

Hours

2022-10-24T23:59:41Z

Eric:

Hedron is open to new members and tours any time a [[Facilitator]] is present. There are certain times facilitators have committed to be present, listed in this Google Calendar.
[https://calendar.google.com/calendar/u/0?cid=ZnNuYzY5NnRrZ3V0MWRvbHR0Mms0ZDRlbmdAZ3JvdXAuY2FsZW5kYXIuZ29vZ2xlLmNvbQ Google Calendar - Hedron Open Hours]

Hours

2022-10-24T23:57:14Z

Eric: Created page with "[https://calendar.google.com/calendar/u/0?cid=ZnNuYzY5NnRrZ3V0MWRvbHR0Mms0ZDRlbmdAZ3JvdXAuY2FsZW5kYXIuZ29vZ2xlLmNvbQ Google Calendar - Hedron Open Hours]"

[https://calendar.google.com/calendar/u/0?cid=ZnNuYzY5NnRrZ3V0MWRvbHR0Mms0ZDRlbmdAZ3JvdXAuY2FsZW5kYXIuZ29vZ2xlLmNvbQ Google Calendar - Hedron Open Hours]

Facilitators

2022-10-21T23:08:40Z

Eric:

Facilitator

2022-10-21T23:01:25Z

Eric: Redirected page to Facilitators

#REDIRECT [[Facilitators]]

Membership Info

2022-10-21T22:59:40Z

Eric:

== What do you get with your membership? ==
* Access to the space any time a facilitator is at the shop, and a class isn’t in the way
* Access to tools, 3D printers, laser cutters, welders, art supplies, kitchenette, etc.
* Greatly discounted classes
* Access to the wealth of knowledge of your fellow shopmates. This is a very dynamic and communally empowering environment, with lots of talented people from different backgrounds
* 1hr of 1-on-1 equipment training per month.
* A say in how the space is run. We’ll host open meetings on many Thursdays. Check the calendar! h.h aims to be a non-hierarchical do-ocracy, where its members put forth their energy into the community autonomously.

== How much does membership cost? ==
* $40-$80/month pay-what-you-are able scale. Price list here: https://bit.ly/2Xv709Q
* Total price is negotiated with a facilitator upon signing up. Please let us know if your situation changes. You can always volunteer time to cover all or part of dues.
* Once you’re a member in good standing for at least a month, you may get the door code if you’ve shown the ability to safely and responsibly use the space.
* Tool training beyond your free 1hr per month will be $15/hr or negotiated with a facilitator.
* Some tools have consumable fees.

== How do I sign up? ==
Find a [[Facilitator]] at the space and ask for a tour. Sign the [[Member Agreement]] and [[Liability waiver]] and pay using the [[https://hhacker.space/subscribe.htm Monthly Subscription]] link on our [[https://hhacker.space/ website]]

== New Member? ==
* [[New Member Starter Pack]]

Main Page

2022-10-21T22:55:24Z

Eric:

__NOTOC__
Welcome to our wiki! Members are invited to register and edit pages. Knowledge is Power!

[[File:Hh_pliers_logo.jpg|600px|thumbnail]]

== About Us ==

Hedron Hackerspace is a community shop space where members can access tools and get instruction for building your dream project
==== [[2020 SE Bush St|Our Physical Location]] ====

== [[Contact|Contact Us]] ==

See [[Contact|how to contact us]]

== [[Membership Info|Membership]] ==

[[Membership Info|Interested in becoming a member?]]

== [[Equipment|Tools and Equipment]] ==

See a [[Equipment|list of our Tools and Equipment]]

== [[FAQs]] ==
Checkout our common list of [[FAQs]]

Info for [[Facilitators]]

The Bible

2022-10-21T20:15:30Z

Eric:

The Bible is used for official processions. Some might claim it is simply a McMaster Carr catalogue that was tagged by dmo, and they would be correct.

It's typical place is in the [[Libre-ary]], or on the floor to make it easier to "swear on the bible" during processions.
[[File:Bible.jpg|The Bible in its proper place, on the floor|400px|thumbnail ]]

Libre-ary

2022-10-21T20:05:26Z

Eric: Created page with "The libre-ary(lee-brair-ee) is a few shelves with books on them for people to read or take/leave. If it's labeled with someone's name, including Hedron, please don't take it. thumbnail"

The libre-ary(lee-brair-ee) is a few shelves with books on them for people to read or take/leave. If it's labeled with someone's name, including Hedron, please don't take it.
[[File:Libre-ary.jpg|Libreary books on shelves|thumbnail]]

File:PP-shredder-extruder.jpg

2022-10-21T20:01:10Z

Eric:

File:Libre-ary.jpg

2022-10-21T20:00:26Z

Eric:

The Bible

2022-10-21T19:52:21Z

Eric: Created page with "The Bible is used for official processions, notably Hazing. Some might claim it is simply a McMaster Carr catalogue that was tagged by dmo, and they would be correct. It's typical place is in the Libre-ary, or on the floor to make it easier to "swear on the bible" during processions. thumbnail "

The Bible is used for official processions, notably [[Hazing]]. Some might claim it is simply a McMaster Carr catalogue that was tagged by dmo, and they would be correct.

It's typical place is in the [[Libre-ary]], or on the floor to make it easier to "swear on the bible" during processions.
[[File:Bible.jpg|The Bible in its proper place, on the floor|400px|thumbnail ]]

File:Bible.jpg

2022-10-21T19:44:21Z

Eric:

Facilitators

2022-10-21T19:36:41Z

Eric:

Back Office

2022-10-21T04:51:27Z

Eric: Created page with "Find on the World Map. This room houses * 3D Printers * Vinyl Cutter * Shared shop computer(s) * Workspace * Classes * Crafts including sewing"

Find on the [[World Map]]. This room houses
* 3D Printers
* Vinyl Cutter
* Shared shop computer(s)
* Workspace
* Classes
* Crafts including sewing

2020 SE Bush St

2022-10-21T04:47:38Z

Eric:

Our building is located at 2020 SE Bush St, Portland, OR 97202

== Physical Address ==
[[File:Google-Maps-Location.png|600px|address of space]]
[[File:World Map.jpeg|600px]]

== Public Transport ==

* TODO Add public transport info here

== Getting In ==
For at least the first month you won't have the code to the building but don't worry there are two main ways to get in without a key

=== Door unlocked during normal hours ===
Try the door, it could already be unlocked. If you come during our [[Hours|normal hours]] then the door is likely unlocked and open. Come on in!

=== Call ahead, we'll let you in ===
[[Contact|Call us]]! There is almost always a member nearby ready to let you in. Seriously, this works really well!

== Points of interest nearby ==

* TODO Add points of interest

2020 SE Bush St

2022-10-21T04:46:36Z

Eric:

Our building is located at 2020 SE Bush St, Portland, OR 97202

== Physical Address ==
[[File:Google-Maps-Location.png|600px|address of space]]

== Public Transport ==

* TODO Add public transport info here

== Getting In ==
For at least the first month you won't have the code to the building but don't worry there are two main ways to get in without a key

=== Door unlocked during normal hours ===
Try the door, it could already be unlocked. If you come during our [[Hours|normal hours]] then the door is likely unlocked and open. Come on in!

=== Call ahead, we'll let you in ===
[[Contact|Call us]]! There is almost always a member nearby ready to let you in. Seriously, this works really well!

== Points of interest nearby ==

* TODO Add points of interest

[[File:World Map.jpeg]]

File:World Map.jpeg

2022-10-21T04:45:41Z

Eric: Eric uploaded a new version of File:World Map.jpeg

== Summary ==
[[World Map]]

File:World Map.jpeg

2022-10-21T04:43:03Z

Eric: Eric uploaded a new version of File:World Map.jpeg

== Summary ==
[[World Map]]

World Map

2022-10-21T04:23:12Z

Eric: Created page with "The building is called Manifestation, and Hedron occupies some space, but definitely not all of it. 700px"

The building is called Manifestation, and Hedron occupies some space, but definitely not all of it.

[[File:World Map.jpeg|700px]]

File:World Map.jpeg

2022-10-21T04:15:56Z

Eric: World Map

== Summary ==
[[World Map]]

Liability waiver

2022-10-21T02:27:07Z

Eric:

https://docs.google.com/document/d/1p7A0lU78J4mPaLoFNXz9zRcDIq0quFRqcIX4NpUIHHA/edit?usp=sharing

[[File:Shop Liability Waiver-10-20-2022.pdf]]

Liability waiver

2022-10-21T02:26:56Z

Eric:

https://docs.google.com/document/d/1p7A0lU78J4mPaLoFNXz9zRcDIq0quFRqcIX4NpUIHHA/edit?usp=sharing

File:Shop Liability Waiver-10-20-2022.pdf

Member Agreement

2022-10-21T02:26:23Z

Eric:

[https://docs.google.com/document/d/1l3CDsCe_zyb_0C0pht6DiqpAUETnxGl8E7gCGvtW7kc/edit?usp=sharing https://docs.google.com/document/d/1l3CDsCe_zyb_0C0pht6DiqpAUETnxGl8E7gCGvtW7kc/edit?usp=sharing]

[[File:Member Agreement-10-20-2022.pdf]]

File:Member Agreement-10-20-2022.pdf

2022-10-21T02:25:34Z

Eric:

File:Shop Liability Waiver-10-20-2022.pdf

2022-10-21T02:25:23Z

Eric:

File:1 (2).png

2022-10-21T02:25:00Z

Eric:

Liability waiver

2022-10-21T02:13:22Z

Eric: Created page with "https://docs.google.com/document/d/1p7A0lU78J4mPaLoFNXz9zRcDIq0quFRqcIX4NpUIHHA/edit?usp=sharing"

https://docs.google.com/document/d/1p7A0lU78J4mPaLoFNXz9zRcDIq0quFRqcIX4NpUIHHA/edit?usp=sharing

Member Agreement

2022-10-21T02:04:09Z

Eric: Created page with "[https://docs.google.com/document/d/1l3CDsCe_zyb_0C0pht6DiqpAUETnxGl8E7gCGvtW7kc/edit?usp=sharing https://docs.google.com/document/d/1l3CDsCe_zyb_0C0pht6DiqpAUETnxGl8E7gCGvtW7kc/edit?usp=sharing]"

[https://docs.google.com/document/d/1l3CDsCe_zyb_0C0pht6DiqpAUETnxGl8E7gCGvtW7kc/edit?usp=sharing https://docs.google.com/document/d/1l3CDsCe_zyb_0C0pht6DiqpAUETnxGl8E7gCGvtW7kc/edit?usp=sharing]

Facilitators

2022-10-21T02:01:36Z

Eric: Created page with "Facilitators are members who help out others at the space. They have been granted extra privileges (aka responsibilities) by being present and showing an aptitude for maintaining the space. You can see who is a facilitator by looking at their role in discord. == What to expect == * Keep the doors open for new members to come by * Deal with visitors and give them a tour of our space if necessary * Signing up members by pointing them to the bottom of our website, and havi..."

Main Page

2022-10-21T01:41:10Z

Eric:

__NOTOC__
Welcome to our wiki! Members are invited to register and edit pages. Knowledge is Power!

[[File:Hh_pliers_logo.jpg|600px]]

== About Us ==

Hedron Hackerspace is a community shop space where members can access tools and get instruction for building your dream project
==== [[2020 SE Bush St|Our Physical Location]] ====

== [[Contact|Contact Us]] ==

See [[Contact|how to contact us]]

== [[Membership Info|Membership]] ==

[[Membership Info|Interested in becoming a member?]]

== [[Equipment|Tools and Equipment]] ==

See a [[Equipment|list of our Tools and Equipment]]

== [[FAQs]] ==
Checkout our common list of [[FAQs]]

Info for [[Facilitators]]

User:Eric

2022-06-05T19:30:15Z

Eric:

Ohaio! I'm Eric(he, him, they), bird person of the space. avewondersmith@gmail.com
My skills include

* Electronics repair
* Arduino
* Cnc routing
* Laser cutting
* Plastic recycling/mold making
* Music production/audio stuff
* Video editing
* Teaching
* Welding
* Engineering/design
* Server stuff

Hosting Events

2022-06-05T19:27:55Z

Eric: Created page with "So you're interested in hosting an event at the space. Great! Providing space for people to share skills and ideas between each other is a core part of our mission, and we're happy to help you to do that. Some important things to figure out before we help you post on the Meetup page include * How many people can you comfortably fit/teach? * Do you have all the materials/equipment? Do people need to bring anything in? * Draft a description of the event, including date/tim..."

So you're interested in hosting an event at the space. Great! Providing space for people to share skills and ideas between each other is a core part of our mission, and we're happy to help you to do that. Some important things to figure out before we help you post on the Meetup page include
* How many people can you comfortably fit/teach?
* Do you have all the materials/equipment? Do people need to bring anything in?
* Draft a description of the event, including date/time, duration, fees, etc.. A photo is great.
* Is this a commercial event? If so, how are you going to be paying the space?
Once you know all this, contact Hal(mrbuckets) or Eric on the [[Discord]] server to follow up.

If you request a 'suggested donation' for your event you can direct attendees to the bottom of our website [https://hhacker.space https://hhacker.space] where they can click the Donate button

Equipment

2022-03-18T22:19:46Z

Eric:

Here is a list of all the shared equipment we have. Some things have their own pages describing how to use them and their rates.

{| class="wikitable"
|-
! scope="col"| Key
! scope="col"| Meaning
|-
! scope="row"| F
| Free to use
|-
! scope="row"| C
| Bring your own consumables or pay for ours. A tiny bit of free use is okay
|-
! scope="row"| R
| Rental price required. (Covers maintenance)
|-
! scope="row"| T
| Training or certification required
|-
! scope="row"| t
| Please ask for help if you haven't used this tool before
|-
|}

{| class="wikitable"
|-
! scope="col"| Equipment
! scope="col"| Rates
! scope="col"| See also
|-
! scope="row" colspan="3"| [[3D Printing | 3D Printers]]
|-
| scope="row"| Printrbot Simple Metal Extended Dual
| C
| We stock basic PLAs for $20/kg
|-
| scope="row"| Orange Kossel Mini
| C
| We stock basic PLAs for $20/kg
|-
| scope="row"| Green MOST Delta
| C
| We stock basic PLAs for $20/kg
|-
| scope="row"| Blue Kossel Mini (OOC, needs work)
| C
| We stock basic PLAs for $20/kg
|-
| scope="row"| Reprap Pro Mendel with paste extruder (OOC, needs work)
| C
| We stock basic PLAs for $20/kg
|-
! scope="row" colspan="3"| Other CNC
|-
| scope="row"| 40w Muse Core laser cutter/engraver 20in x 12in
| R T
| Rate TBD [[Laser cutting]]
|-
| scope="row"| 40w Flux Beambox laser cutter/engraver 15in x 14in
| R T
| $5/hr of laser time. [[Laser cutting]]
|-
| scope="row"| 4ft X 4ft x 2.75in [[CNC Router]]
| R T
| $15-25/hr of spindle time
|-
| scope="row"| Fabtotum CNC router (3D print head damaged)
| F
|
|-
| scope="row"| MH-871-MK2 [[Vinyl Cutter]]
| F
|
|-
! scope="row" colspan="3"| Metalworking
|-
| scope="row"| Millermatic auto wire-feed MIG 110v welder with argon/CO2
| R T
| $5/hr of torch time. Most people wont use more than 1hr in a day
|-
| scope="row"| 220v MIG Welder with argon/CO2 (Harbor Freight)
| R T
| $5/hr of torch time. Most people wont use more than 1hr in a day
|-
| scope="row"| Vertical [[Milling Machine]] (Grizzly G1005)
| C t
| Training and checkoff required. Bring your own bits or pay for any that you use.
|-
| scope="row"| Big old school lathe
| C t
|
|-
| scope="row"| Drill press
| C t
|
|-
| scope="row"| Portable band saw for metal
| F t
|
|-
| scope="row"| Band saw for wood
| F t
|
|-
| scope="row"| Bench grinder
| F t
|
|-
| scope="row"| Angle grinders(Cutoff, flapdisc, grinding wheel)
| C T
| Safety check required! This is a [[dangerous tool]]
|-
| scope="row"| Various drills
| C
|
|-
| scope="row"| 3-in-1 Sheet metal brake/sheer/roller
| F
| We have some scrap sheet aluminum
|-
| scope="row"| Other metalworking equipment
| N/A
| We share the building with some metalworkers with lots of equipment. See Eric for case-by-case use. Experience preferred.
|-
! scope="row" colspan="3"| Other shop/woodworking
|-
| scope="row"| Compound Miter Chop Saw
| F
|
|-
| scope="row"| Impact driver
| F
|
|-
| scope="row"| Benchtop belt sander
| F
|
|-
| scope="row"| Sanders
| F
|
|-
| scope="row"| Various air tools + 120psi continuous shop air
| F
|
|-
| scope="row"| T-shirt heat press
| F t
|
|-
| scope="row"| Sewing Machine
| F
|
|-
! scope="row" colspan="3"| Tech
|-
| scope="row"| Adjustable soldering irons
| F
|
|-
| scope="row"| Hot air rework station
| F t
|
|-
| scope="row"| Digital oscilloscope and signal generator
| F t
|
|-
| scope="row"| Handheld digital oscilloscope
| F
|
|-
| scope="row"| Desoldering gun
| F
|
|-
| scope="row"| Multimeters
| F
|
|-
| scope="row"| Shared computer - powerful desktop
| F
|
|-
| scope="row"| Shared computer - less powerful laptop
| F
|
|-
| scope="row"| Wide range of prototyping components available for use/purchase
| C
|
|-
| scope="row"| Basic ink-jet color printer HP Officejet with scanning and double sided printing
| C
|
|-
! scope="row" colspan="3"| Plastic recycling
|-
| scope="row"| Precious Plastics [[Extruder Shredder Combo]] for use with free provided PP
| F T
|
|-
| scope="row"| [[Shredder]] for general use
| F T
|
|-
| scope="row"| Toaster oven for experiments
| F
|
|-
| scope="row"| Clothes irons
| F
|
|-
| scope="row"| Coming soon: Sheet press oven
| F
|
|-
|}

Equipment

2021-07-23T21:05:31Z

Eric:

Here is a list of all the shared equipment we have. Some things have their own pages describing how to use them and their rates.

{| class="wikitable"
|-
! scope="col"| Key
! scope="col"| Meaning
|-
! scope="row"| F
| Free to use
|-
! scope="row"| C
| Bring your own consumables or pay for ours. A tiny bit of free use is okay
|-
! scope="row"| R
| Rental price required. (Covers maintenance)
|-
! scope="row"| T
| Training or certification required
|-
! scope="row"| t
| Please ask for help if you haven't used this tool before
|-
|}

{| class="wikitable"
|-
! scope="col"| Equipment
! scope="col"| Rates
! scope="col"| See also
|-
! scope="row" colspan="3"| [[3D Printing | 3D Printers]]
|-
| scope="row"| Printrbot Simple Metal Extended Dual
| C
| We stock basic PLAs for $20/kg
|-
| scope="row"| Orange Kossel Mini
| C
| We stock basic PLAs for $20/kg
|-
| scope="row"| Green MOST Delta
| C
| We stock basic PLAs for $20/kg
|-
| scope="row"| Blue Kossel Mini (OOC, needs work)
| C
| We stock basic PLAs for $20/kg
|-
| scope="row"| Reprap Pro Mendel with paste extruder (OOC, needs work)
| C
| We stock basic PLAs for $20/kg
|-
! scope="row" colspan="3"| Other CNC
|-
| scope="row"| 40w Muse Core laser cutter/engraver 20in x 12in
| R T
| Rate TBD [[Laser cutting]]
|-
| scope="row"| 40w Flux Beambox laser cutter/engraver 15in x 14in
| R T
| $5/hr of laser time. [[Laser cutting]]
|-
| scope="row"| 4ft X 4ft x 2.75in [[CNC Router]]
| R T
| $15-25/hr of spindle time
|-
| scope="row"| Fabtotum CNC router (3D print head damaged)
| F
|
|-
| scope="row"| [[Plasma CNC]]
| N/A
| Ask Eric to run jobs on this for you
|-
| scope="row"| MH-871-MK2 [[Vinyl Cutter]]
| F
|
|-
! scope="row" colspan="3"| Metalworking
|-
| scope="row"| Millermatic auto wire-feed MIG 110v welder with argon/CO2
| R T
| $5/hr of torch time. Most people wont use more than 1hr in a day
|-
| scope="row"| 220v MIG Welder with argon/CO2 (Harbor Freight)
| R T
| $5/hr of torch time. Most people wont use more than 1hr in a day
|-
| scope="row"| Vertical [[Milling Machine]] (Grizzly G1005)
| C t
| Training and checkoff required. Bring your own bits or pay for any that you use.
|-
| scope="row"| Drill press
| C t
|
|-
| scope="row"| Portable band saw for metal
| F t
|
|-
| scope="row"| Band saw for wood
| F t
|
|-
| scope="row"| Bench grinder
| F t
|
|-
| scope="row"| Angle grinders(Cutoff, flapdisc, grinding wheel)
| C T
| Safety check required! This is a [[dangerous tool]]
|-
| scope="row"| Various drills
| C
|
|-
| scope="row"| 3-in-1 Sheet metal brake/sheer/roller
| F
| We have some scrap sheet aluminum
|-
| scope="row"| Other metalworking equipment
| N/A
| We share the building with some metalworkers with lots of equipment. See Eric for case-by-case use. Experience preferred.
|-
! scope="row" colspan="3"| Other shop/woodworking
|-
| scope="row"| Compound Miter Chop Saw
| F
|
|-
| scope="row"| Impact driver
| F
|
|-
| scope="row"| Benchtop belt sander
| F
|
|-
| scope="row"| Sanders
| F
|
|-
| scope="row"| Various air tools + 120psi continuous shop air
| F
|
|-
| scope="row"| T-shirt heat press
| F t
|
|-
| scope="row"| Sewing Machine
| F
|
|-
! scope="row" colspan="3"| Tech
|-
| scope="row"| Adjustable soldering irons
| F
|
|-
| scope="row"| Hot air rework station
| F t
|
|-
| scope="row"| Tektronics oscilloscope
| F t
|
|-
| scope="row"| Handheld digital oscilloscope
| F
|
|-
| scope="row"| Multimeters
| F
|
|-
| scope="row"| Shared computer - powerful desktop
| F
|
|-
| scope="row"| Shared computer - less powerful laptop
| F
|
|-
| scope="row"| Wide range of prototyping components available for use/purchase
| C
|
|-
| scope="row"| Basic ink-jet color printer HP Officejet with scanning and double sided printing
| C
|
|-
! scope="row" colspan="3"| Plastic recycling
|-
| scope="row"| Precious Plastics [[Extruder Shredder Combo]] for use with free provided PP
| F T
|
|-
| scope="row"| [[Shredder]] for general use
| F T
|
|-
| scope="row"| Toaster oven for experiments
| F
|
|-
| scope="row"| Clothes irons
| F
|
|-
| scope="row"| Coming soon: Sheet press oven
| F
|
|-
|}

Equipment

2021-07-23T21:02:49Z

Eric:

Here is a list of all the shared equipment we have. Some things have their own pages describing how to use them and their rates.

{| class="wikitable"
|-
! scope="col"| Key
! scope="col"| Meaning
|-
! scope="row"| F
| Free to use
|-
! scope="row"| C
| Bring your own consumables or pay for ours. A tiny bit of free use is okay
|-
! scope="row"| R
| Rental price required. (Covers maintenance)
|-
! scope="row"| T
| Training or certification required
|-
! scope="row"| t
| Please ask for help if you haven't used this tool before
|-
|}

{| class="wikitable"
|-
! scope="col"| Equipment
! scope="col"| Rates
! scope="col"| See also
|-
! scope="row" colspan="3"| [[3D Printing | 3D Printers]]
|-
| scope="row"| Printrbot Simple Metal Extended Dual
| C
| We stock basic PLAs for $20/kg
|-
| scope="row"| Orange Kossel Mini
| C
| We stock basic PLAs for $20/kg
|-
| scope="row"| Green MOST Delta
| C
| We stock basic PLAs for $20/kg
|-
| scope="row"| Blue Kossel Mini (OOC, needs work)
| C
| We stock basic PLAs for $20/kg
|-
| scope="row"| Reprap Pro Mendel with paste extruder (OOC, needs work)
| C
| We stock basic PLAs for $20/kg
|-
! scope="row" colspan="3"| Other CNC
|-
| scope="row"| 40w Muse Core laser cutter/engraver
| R T
| Rate TBD [[Laser cutting]]
|-
| scope="row"| 40w Flux Beambox laser cutter/engraver
| R T
| $5/hr of laser time. [[Laser cutting]]
|-
| scope="row"| 4ft X 4ft x 2.75in [[CNC Router]]
| R T
| $15-25/hr of spindle time
|-
| scope="row"| Fabtotum CNC router (3D print head damaged)
| F
|
|-
| scope="row"| [[Plasma CNC]]
| N/A
| Ask Eric to run jobs on this for you
|-
| scope="row"| MH-871-MK2 [[Vinyl Cutter]]
| F
|
|-
! scope="row" colspan="3"| Metalworking
|-
| scope="row"| Millermatic auto wire-feed MIG 110v welder with argon/CO2
| R T
| $5/hr of torch time. Most people wont use more than 1hr in a day
|-
| scope="row"| 220v MIG Welder with argon/CO2 (Harbor Freight)
| R T
| $5/hr of torch time. Most people wont use more than 1hr in a day
|-
| scope="row"| Vertical [[Milling Machine]] (Grizzly G1005)
| C t
| Training and checkoff required. Bring your own bits or pay for any that you use.
|-
| scope="row"| Drill press
| C t
|
|-
| scope="row"| Portable band saw for metal
| F t
|
|-
| scope="row"| Band saw for wood
| F t
|
|-
| scope="row"| Bench grinder
| F t
|
|-
| scope="row"| Angle grinders(Cutoff, flapdisc, grinding wheel)
| C T
| Safety check required! This is a [[dangerous tool]]
|-
| scope="row"| Various drills
| C
|
|-
| scope="row"| 3-in-1 Sheet metal brake/sheer/roller
| F
| We have some scrap sheet aluminum
|-
| scope="row"| Other metalworking equipment
| N/A
| We share the building with some metalworkers with lots of equipment. See Eric for case-by-case use. Experience preferred.
|-
! scope="row" colspan="3"| Other shop/woodworking
|-
| scope="row"| Compound Miter Chop Saw
| F
|
|-
| scope="row"| Impact driver
| F
|
|-
| scope="row"| Benchtop belt sander
| F
|
|-
| scope="row"| Sanders
| F
|
|-
| scope="row"| Various air tools + 120psi continuous shop air
| F
|
|-
| scope="row"| T-shirt heat press
| F t
|
|-
| scope="row"| Sewing Machine
| F
|
|-
! scope="row" colspan="3"| Tech
|-
| scope="row"| Adjustable soldering irons
| F
|
|-
| scope="row"| Hot air rework station
| F t
|
|-
| scope="row"| Tektronics oscilloscope
| F t
|
|-
| scope="row"| Handheld digital oscilloscope
| F
|
|-
| scope="row"| Multimeters
| F
|
|-
| scope="row"| Shared computer - powerful desktop
| F
|
|-
| scope="row"| Shared computer - less powerful laptop
| F
|
|-
| scope="row"| Wide range of prototyping components available for use/purchase
| C
|
|-
| scope="row"| Basic ink-jet color printer HP Officejet with scanning and double sided printing
| C
|
|-
! scope="row" colspan="3"| Plastic recycling
|-
| scope="row"| Precious Plastics [[Extruder Shredder Combo]] for use with free provided PP
| F T
|
|-
| scope="row"| [[Shredder]] for general use
| F T
|
|-
| scope="row"| Toaster oven for experiments
| F
|
|-
| scope="row"| Clothes irons
| F
|
|-
| scope="row"| Coming soon: Sheet press oven
| F
|
|-
|}

DIY Solutions

2021-07-12T04:06:01Z

Eric: Created page with "=== '''DIY Solutions''' === ==== First Page ==== Repairing a badly feeding welder spool File:WelderFeed-before.jpg|thumb|200px|right|link=http://wikipedia.org/wiki/Te..."

Main Page

2021-07-12T03:44:24Z

Eric:

Welcome to our wiki! Its a work in progress. Try starting at one of these links.

Hedron Hackerspace is a community shop space where members can access tools and get instruction for building your dream project.
==== [[FAQs]] ====

==== [[Equipment]] ====
==== [[Membership Info]] ====
==== Members' [[DIY Solutions]] ====

Main Page

2021-07-12T03:42:49Z

Eric:

Welcome to our wiki! Its a work in progress. Try starting at one of these links

==== [[FAQs]] ====

Hadron Hackerspace is a community fabrication shop where members can access tools and get instruction for building your dream project. Members can either utilize the publicly accessible space or rent a private space for fabrication.

==== [[Equipment]] ====
==== [[Membership Info]] ====
==== Members' [[DIY Solutions]] ====

Main Page

2021-06-27T01:55:24Z

Eric:

Welcome to our wiki! Its a work in progress. Try starting at one of these links

==== [[FAQs]] ====
==== [[Equipment]] ====
==== [[Membership Info]] ====

If you're a member, you can help out by adding pages and information. If you see a red link, go forth and click!

FAQs

2021-06-27T01:13:22Z

Eric: Created page with "=== How do I check the space out, get more info, or become a member? === We have open hours posted on our front page(generally open 1-5 Sun-Thurs). You can stop by during thos..."

=== How do I check the space out, get more info, or become a member? ===
We have open hours posted on our front page(generally open 1-5 Sun-Thurs). You can stop by during those hours to get a tour. It can be good to call ahead to make sure people are at the shop before you arrive, by calling the shop number (971)248-0034‬
To become a member, check out [[Membership Info]]
Talk to us on [https://discordapp.com/invite/PAJuX4V Discord] for more info.
=== Do I get 24/7 access as a member? ===
Not at first. New members are only allowed at the space when the shop has code holding members who can close the building present. Once a new member has been in good standing for a month, they are shown how to close the building and are given the door code for 24/7 access. If you don't show up at all in the whole first month, we may delay the probation.
=== Can I bring my friends as a member? ===
Yes, please! Its great to bring your friends in to show them around and assist you on your own projects. If they're just working on their own projects or spending excessive time at the space, it's up to you to talk to them about being a member though. Members are responsible for their guests.
=== What are all these bots on the Discord chat? ===
Those are people communicating over the [[Matrix Bridge]]

Milling Machine

2021-06-03T20:08:01Z

Eric: Created page with "The shop has a Grizzly G1005 vertical milling machine with plenty of tooling. This is not a simple drill press, and requires training and check off even just for simple holes...."

The shop has a Grizzly G1005 vertical milling machine with plenty of tooling. This is not a simple drill press, and requires training and check off even just for simple holes.

Talk to [[User:Eric | Eric]] or [[User:Hal | Hal]] for training and check off. For study mats, we highly recommend [https://www.youtube.com/watch?v=FyuG-B95PQs&list=PLY67-4BrEae9m8v20LNARIRl9Pd9bdFRZ| Blondihacks' playlist on mill skills]
[[File:00s0s 1I4PYzstbKSz 0pO0jm 1200x900.jpg | thumb]]